120mm Fan Bracket for 3x 5.25 In Bays3d Printed adapter to mount a 120mm Fan into 3x 5. 25 Bays. Printed in Black PETG, note that no screws are included. Original design by Milstrata on Thingiverse, licenced under Creative Commons Attribution

3D Printed 1RU rack mount for the Ubiquiti Edge Router 4 and 6 POE Models 6 PoE (Models: ER-4

The Mini PCs slide into the frame from the back and are held in place securely by the rear retaining plate

or even another MS-01 or MS-A2 Mount

The ONT slides into the frame from the front

3D Printed 1U rack mount for the Unifi "Cloud Gateway Ultra" (Model: UCG-Ultra)

3D Printed rack mounted Shelf for 10 Inch Racks

3D Printed rack mounting arms so that you can mount your Unifi Switch 8 150W PoE+ Switch (Model: US‑8‑150W) into a standard 19 inch Rack

Also includes a Cable/PSU management arm that can be connected to the side of the mount so that you can use Velcro or Zipties to secure your Cables and/or Power Brick

simply slide the surround onto the ER-6P and then use the included M3 screws to fasten the other two parts (Cloud Key enclosure and Rack arm) to the ER-6P

3D Printed rack mount that can combine your Unifi Switch 8 150W PoE+ Switch (Model: US‑8‑150W) & Unifi Switch Lite 16 PoE (Model: USW-Lite-16-POE (45W)) into a Single RU

Your Switch slides into the frame from the back after removing the back retaining plate and the Rack mounting arms screw into the side of the frame using the supplied screws

You can even use this to mount 2 of these NUCs into a 1RU space