EM 125kHz RFID Card Reader/WriterThere are 2 options for the EM 125kHz cards: Pre Defined: The card comes with a pre defined 10 digit ID programmed to the card Writable: The card comes with no defined ID The card will can be assigned a custom 10 digit ID by using this USB Card Reader Writer These card SKUs will have the 'w' at the end to designate that they are 'writable'. Software for the HTA 003 can be downloaded here.

Equivalent cable for 5C610

Grey = 1-Wire Communication

HTA-016: Compatible with HID 125kHz

Temp Probe 1 in chain requires cable SKU: HTC-007 to connect Ground and 1-Wire communication

26-bit cards only

16-pin dual row length of 2 meters (or 6

RP1226 to J1939 converter cable mapping for 2019+ PACCAR vehicles with 250k CAN lines

and 495 that have high temp tolerances of 250 degrees Fahrenheit recommended for more permanent installation)

Chain-able Temperature Sensor (DS28EA00) 30 inches in length

Cable is 2 meters in length with 4 connections populated

The 24-pin dual row connectorized power harness has the following connections populated:

Convert input voltage from 10-30VDC down to the proper DC level for the RFID reader