75 ohm 5% 1/4 Watt Resistor (Box of 5000) - CFRThese are Carbon Film Resistor with a value of 75 ohm 1 4W and tolerance of 5%. These Axial resistors are cylindrical in shape with copper plated steel leads extending from each end. Carbon Film Resistor limit the flow of electric current using a Carbon Film. The printed colour code rings, which are Violet, Green, Black, Gold for these 75E resistors, make it easy to identify the value of these resistors. Specification Resistance Value 75 ohm Color

9M ohm 1/8W and tolerance of ±5%

of Pins 4Pins Operating and Storage Temperature Range -55°C TO 150°C

These are Metal Film Resistor with a value of 330k ohm 2W and tolerance of ±5%

The A7800 was intended to tolerate very high common-mode transient slew rates (of at least 10 kV/s) since common mode voltage fluctuations of several hundred volts in tens of nanoseconds are frequent in modern switching inverter motor drives

High activity flux makes more reliable soldering and leaves bright shiny solder joints after reflow

These are Metal Film Resistor with a value of 47 ohm 1/4W and tolerance of ±1%

This 100pF SMD capacitor uses surface mount technology and comes in a 0603 package

2 ohm 1/4W and tolerance of ±5%

Gold for these 240K resistors

35 Volt Typical (RG = 10 k ohms)

It also offers high efficiency and a high surge current capability of 240A

The ultra-low inductance ensures that the high current signal flowing through these cables will lose a minimal amount of energy