2" Axle Double Angular Contact BearingHyper Racing # 06 116 This is a custom made double wide angular contact bearing with grease groove. The grease groove allows grease to travel from the bearing carrier's grease fitting into the balls of the bearing. When pressing the bearing into the bearing carrier, do not press on the inner race, only apply force to the outer race. Pressing on the inner race will damage the bearing balls and cause premature failure. We recommend the bearings be

Made to fit our X7 Jacob's ladder bearing carriers

Brake fade happens when the brake fluid gets so hot it boils and creates air in the brake lines

Hyper Racing # 12-351

Right Side

Top left to right posts: 18-3/4"

(1) 1/4-28 x 2” HHCS with (1) 1/4-28 nylock full nut

Submit the completed form

Hyper Racing # 02-290

Hyper Racing # 04-109

Hyper Racing’s 1-3/4” Front Axles are constructed from the highest possible quality

Drill out your sprocket bolt holes to 5/16" using a P drill bit size

Click Configure to Build Your Own Spacer Kit