Estes Rockets - Space Corps Vesta Intruder, Rocket Kit, AdvancedThe Vesta Intruder stands over 2 feet tall and can reach altitude of up to 350 ft on an Estes C11 3 engine! Although it roars off the pad with a standard Estes engine, it disappears into the sky like the light speed spacecraft it was designed to be. WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, yellow glue, hobby knife, masking tape, wax paper, sand block, primer (gray), paint (black, gray) and clear coat (optional). (Tools,

this is not an automatic transmission

Thick magnetic

AR106030 (optional)

This is the RC4WD Warn Hawse Fairlead

Can be used in conjunction with nylon or steel Kwik-Links or with ball links where extra long pushrods are needed

The control program on the circuit board provides linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW431 - sold separately)

and acceleration within the given time and defined distance

reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90%

Servo Saver Built into Servo Horn

lightened aluminum handle for incredibly light weight

and the tendency for the left and right wings to stall at different speeds led to various improvements being added throughout production

Clear parts recreate headlights