Schoeps A 20 Elastic Suspension for CCM Series MicrophonesThe A 20 is recommended when only the CMC microphone amplifier and a capsule are used, and maximum protection from vibration is desired, for example, on a boom. When accessories such as the CUT filters, GVC or S 250 Cg are added to the microphone, the stiffer elastics of the A 20 S are required. The base has a 5 8" 27 NS internal thread with adapter for 3 8" and 1 2" included. A special clamp secures the microphone cable. This is necessary with the A

Diameter from outside edges is 4 (102mm) All hardware included for installation

Houses of worship

Turnbuckles serve as a load_rated tensioning and leveling device

The advantage of this system is that for production sound it eliminates the limitations of wireless microphones

Features: Modular Eight Channel Mixer/Amplifiers for paging

Recording can begin instantly by holding the record side switch while turning the unit on

can hear the user as normal

SCMS-T is supported using Bluetooth® (A2DP)

48kHz/24-bit linear PCM mono recording

Four conductor attached cable

Patented Die-cast Metal Collar on TLF

Locks in setup position for stability