Aerospace series. Steel FE-CM3801 (X5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened. Investment casting. De ≤ 50 mm. Rm ≥ 1030 MPaWhat is BS EN 3973 Steel FE CM3801 aerospace series about? BS EN 3973 is an international standard that discusses the aspects of steel used in the construction of the aerospace sector. BS EN 3973 specifies the requirements relating to: Steel FE CM3801 (X5CrNiCuNb16 4) Homogenized, solution treated, and precipitation hardened Investment casting De 50 mm Rm 1030 MPa for aerospace applications. BS EN 3973 provides the technical specification, chemical

in the outside diameter range of 5 mm to 50 mm

This part specifies the general technical delivery conditions for open die steel forgings

General caution

Competent staff

This standard also updates the technical report to take in the new essential principles set out by the international medical device regulators forum

Inclusion of the revised EN 12916

Why should you use BS EN 1434-1

NOTE This part of ISO 16232 also covers vocabulary that will not be applied in parts 2 to 10 of ISO 16232

BS 1728-15 exemplifies nickel using the photometric method for the analysis of aluminium and aluminium alloys

BS ISO 81060-2 is not applicable to the validation of non-automated sphygmomanometers as given in ISO 81060-1 or invasive blood pressure monitoring equipment as given in IEC 60601-2-34

Matters related to quality assurance systems

These cables are not primarily intended for direct connection to a low impedance source